Garrick debuts the openworked S8 in Singapore, showcasing more than eight weeks of bench work and a deliberate approach to finely polished movement surfaces.
At IAMWATCH in Singapore this weekend, British independent watchmaker Garrick has introduced a timepiece whose principal distinction is not the number of functions it performs, but the visibility of the work required to make them possible. The S8 displays hours, minutes and small seconds through an extensively openworked movement. Garrick's technical account, published on 9 November, reveals that assembly and finishing occupied more than eight weeks at the bench, approximately twice the time originally anticipated. It is a particularly interesting proposition for collectors who have begun to look beyond mechanical complications as the principal measure of fine watchmaking.
A time-only watch with an unusually demanding workload
Garrick contrasts the development of the S8 with its own S3 Deadbeat Seconds, which incorporates a mechanism that advances the seconds indication in discrete intervals. The comparison is important because it challenges a familiar assumption about horological complexity. An additional function often requires more components and development, but the difficulty of preparing the surfaces of a movement depends on considerably more than the number of functions the completed object performs. The S8 illustrates that difference through a design that exposes a great deal of the underlying mechanism.
The maker had initially expected around four weeks of assembly and finishing. The eventual period exceeded eight weeks, and Garrick stresses that the time spent machining components and completing other preparatory operations is additional to that figure. Collectors should therefore understand the reported duration as the maker's description of bench work rather than the entire manufacturing lead time. A comparatively straightforward display can conceal a great deal of labour, particularly when the surfaces beneath it have been designed to be inspected instead of hidden.
The consequences of removing material
An openworked movement allows parts that would normally be obscured to become visible when the watch is worn. The S8 has no conventional solid dial across the front of the movement; the time indications are organised around a perimeter chapter ring. Openings in the bridges expose mechanisms occupying different levels within the watch. Garrick has extended this treatment to the ratchet wheel, itself a relatively small component that participates in winding the movement.
Removing portions from a component does not automatically reduce the work necessary to finish it. Each opening introduces an additional boundary that must be prepared, and relatively small areas may demand painstaking access with hand tools. The designer must also preserve the characteristics necessary for the component to perform its mechanical role. The shape of an opening may be chosen partly for its appearance, but the resulting part still has to function within the assembled calibre. This interaction between engineering and aesthetic decisions distinguishes a thoughtfully executed openworked watch from a movement that merely has conspicuous holes.
The inward corner as evidence of the technique
Anglage, the bevelled finishing of component edges, is one of the details by which knowledgeable collectors assess movements. In its simplest form, the technique removes an irregular edge and creates a deliberately shaped narrow surface. Finishing and polishing that surface can produce a highlight that defines the contours of a component. On the Garrick S8, the maker reports that all bevels are formed by hand, including those on the mainplate.
Particularly interesting are the sharply defined inward corners, at which two finished surfaces meet in a recess. A rotating machining tool has a finite radius and cannot reach the vertex of a perfectly sharp internal angle in the same way as a suitable hand tool. Producing that detail therefore requires careful preparation with files and progressively finer finishing materials. It is better understood through inspection under magnification than from a general photograph. Collectors contemplating an acquisition should ask to examine representative corners on the actual movement, where the consistency of their execution can be considered alongside the treatment of other surfaces.
Why the maker deliberately limited the polished edges
Despite the substantial effort required to prepare the bevels, Garrick has deliberately chosen relatively narrow treatments. The justification is partly aesthetic and partly functional. The visible mechanism already contains many boundaries, and broad highly reflective edges could allow those boundaries to dominate the appearance of the watch. Fine highlights establish the shapes of the components while permitting the hands to remain an important element of the design.
This is a particularly useful example of how finishing should be assessed within the composition rather than as a collection of individual techniques. A collector can admire a well-polished surface but still question whether the overall design would benefit from more of it. Light changes continually as a wrist moves, affecting the way polished surfaces are perceived. A watch intended for daily use needs to remain readable without depending on a particular viewing angle. The controlled use of reflection on the S8 is consequently an important part of its design argument, not simply a restriction imposed to reduce the amount of work.
The optical properties of black polishing
Garrick also describes its use of black polishing. The expression does not indicate that a component has been covered with black paint. A highly flat and carefully polished surface can appear dark or bright according to the position of the viewer and the direction of incident light. Achieving that effect requires a flat surface with sufficiently uniform preparation, since defects can disrupt the reflected image.
The most informative way to appreciate such a finish is to rotate the watch gradually beneath a controlled light source. From different angles, the same component may be perceived very differently. The effect can help a relatively small detail stand apart from surrounding surfaces that reflect light in a less uniform manner. It also makes the maker's observation about photography understandable: a still photograph captures only one arrangement of illumination, whereas the changing appearance of the watch provides an important part of the experience of wearing it.
A watchmaker responsible for the entire watch
Garrick describes an approach in which one watchmaker undertakes the finishing and assembly of each example, together with the production of its hands. This form of individual responsibility has particular appeal in a field where specialist operations may otherwise be distributed among several technicians. It gives the purchaser an opportunity to consider a completed watch as an identifiable combination of technical decisions and individual bench work.
The hands can receive a polished finish or colour produced by heating the steel. The visual effects of controlled oxidation provide an alternative to applying decorative colour as a coating. The process must be carefully regulated to reach the intended result. Owners commissioning an individual example may wish to discuss how the chosen finish will interact with the treatment of the movement and the chapter ring. The relevant consideration is not simply whether a blue or purple hand is attractive in a photograph, but whether its appearance complements the rest of the watch in varied lighting.
Small details visible only at close range
The chapter ring is made from German silver, an alloy that does not contain silver despite its name. The maker describes a laborious process of adding ink to the engraved markings individually under magnification. Its explanation draws attention to a practical limitation of the selected frosted surface: approaches used on other metals could leave unwanted staining. The character of the material therefore influences the finishing technique necessary to produce the completed markings.
Another small feature is a separate disc bearing the individual number near eleven o'clock. Rather than have the identifier applied directly to a larger component, the maker prepares and finishes this small element separately. Details of this scale may not be immediately evident during an ordinary reading of the time. They are among the features that make repeated examination of the watch rewarding. A collector considering a personalised commission may also appreciate that Garrick leaves the question of caseback engraving to the owner, instead of deciding the entire decorative treatment in advance.
An independent approach worth examining in person
The S8 is making its public debut from 12 to 15 November at The Singapore EDITION, according to the maker. Beyond the event itself, the wider significance of the watch lies in its rejection of the idea that mechanical functions alone establish the value of specialised watchmaking. A visitor with access to the actual watch and a loupe can examine the features that Garrick describes, rather than relying on abstract claims about hand craftsmanship.
For yacht owners accustomed to commissioning furniture, metalwork or bespoke decorative objects, the analogy is clear. The quality of a surface depends not only on its apparent brightness or complexity but on the consistency of its preparation and its suitability within the complete design. The S8 invites a similar form of connoisseurship. A collector should consider the maker's service arrangements, individual specification options and current purchase terms alongside the technical merits of the object. The strongest attraction of a watch built around visible finishing is that many of the qualities purported to distinguish it remain available for the owner to inspect throughout its working life.
Primary source: Garrick Watchmakers, official S8 technical announcement, 9 November 2026.
Garrick Watchmakers — official S8 editorial launch photograph. Official source.