MB&F Reintroduces Legacy Machine N°1 as 42mm EVO — verified official source image

MB&F Reintroduces Legacy Machine N°1 as 42mm EVO — verified official source image

Lifestyle

MB&F Reintroduces Legacy Machine N°1 as 42mm EVO

MB&F has revived its original Legacy Machine N°1 with a 42mm EVO case, twin independently set time zones, a 60-hour reserve and a 33-piece rose-gold edition.

MB&F revisits the watch that began its Legacy Machines

MB&F has introduced the Legacy Machine N°1 EVO, a new interpretation of the watch that established its Legacy Machines collection in 2011. The model was presented in October 2026 with the familiar three-dimensional balance wheel and two independent time displays, but now sits in a 42-millimetre case with features intended to make it more practical for active daily wear. The launch brings a distinctive piece of modern independent watchmaking back into current production.

The original LM1 was developed with watchmakers Jean-François Mojon and Kari Voutilainen and became known for its theatrical arrangement of traditional horological elements. Reworking that design requires more than shrinking a case. The new model changes the movement's power reserve, its protective construction and the way the wearer interacts with the straps and controls.

Two time displays remain independent

The watch preserves two separate dials for displaying different time zones, with adjustments that are not restricted to simple whole-hour offsets. Between them sits a 14-millimetre balance wheel that appears suspended over the dial. The new arrangement pairs the visible regulator with a Straumann double hairspring, maintaining the visually prominent heart of the original architecture.

Its ability to show two independently set times may suit frequent travellers who move between countries or wish to follow another location. Yet the appeal is also aesthetic: a watchmaker can display complex mechanical elements normally hidden beneath a dial while still presenting information that serves a practical purpose. Buyers should understand its manual-setting procedure rather than assume it functions like a conventional automatic travel watch.

A smaller case joins MB&F's EVO family

The new 42-millimetre case is available in grade 5 titanium or 5N+ rose gold, compared with the larger and more formal architecture associated with earlier versions of the LM1. The titanium edition uses a rhodium-coloured dial plate, while the rose-gold version has a green dial plate and is limited to 33 pieces. Both are presented on integrated rubber straps.

MB&F says the straps can be exchanged at the case and clasp, allowing the appearance to be changed without treating every adjustment as a workshop job. Case material also influences how a watch feels on the wrist. Titanium may appeal to someone seeking lower weight, while the gold version offers a different visual and physical presence, regardless of their common movement architecture.

FlexRing protection introduces a more practical dimension

The EVO design philosophy incorporates MB&F's FlexRing system, a shock-absorbing element positioned between the case and the movement. The LM1 EVO is also specified with 80 metres of water resistance and a screw-down crown, features intended to make a highly unusual mechanical watch less vulnerable in ordinary use. These are the maker's specifications rather than proof that the watch can safely withstand every sporting activity.

Even when protected, an exposed mechanical display with a prominent balance wheel deserves respectful handling. Owners should follow the manufacturer's guidance on impact, winding and water exposure, particularly before using a valuable watch in conditions where servicing may be difficult. Durability improvements can reduce certain risks without changing the fundamental need for maintenance.

A redesigned reserve and greater autonomy

The hand-wound movement offers a stated 60-hour power reserve, an extension intended to give owners more flexibility between winding sessions. A redesigned and inclined indicator shows the remaining energy in the mainspring, preserving one of the most recognisable elements of the original LM1 while improving its integration into the new arrangement.

A longer reserve may make daily ownership simpler, but it should not be mistaken for an automatic winding system. The movement still needs periodic attention from its wearer, and the hand-finished construction can require specialist service. Buyers interested in technical watchmaking should ask about maintenance intervals, parts support and the details of any warranty provided with a particular example.

Why the return matters to collectors

In 2012, the first Legacy Machine N°1 won major honours at the Grand Prix d'Horlogerie de Genève, helping establish the collection's reputation. Fifteen years after its debut, MB&F is using the EVO treatment to make that design relevant to a different style of ownership. The result has the visual character of an elaborate independent watch yet includes practical features not central to its original brief.

The new edition does not replace the historical significance of the 2011 reference. Instead, collectors now have another way of experiencing its unusual arrangement of time displays and suspended balance wheel. The confirmed October news is the introduction of the LM1 EVO in titanium and limited rose gold, with the eventual market reception still to be determined by buyers and owners.

Business opportunities · Superyacht Guide

Connect with readers across the superyacht lifestyle

Relevant luxury, travel and marine businesses can discuss clearly identified advertising or strengthen their company presence across Superyacht Guide. Paid promotion does not determine independent editorial coverage.